Bowls and jars of fruit and vegetable powders on pale wood

Guide · Updated 17 November 2026

How to reada COA.

A certificate of analysis (COA) is the lab report for one batch. For each test it shows the specification the batch must meet and the result the lab measured. Devgiri tests in its own microbiology and chemical labs, and a COA ships with every batch. This guide reads a Devgiri spinach COA line by line, then shows a mint COA as a second example.

What a COA is

A COA belongs to one batch, named by its batch code. It lists the physical, chemical and microbiology tests run on a sample of that batch. Each line has three parts: the test, the specification (the limit or range the batch must meet) and the result. A buyer checks that every result sits inside its specification before the batch is used.

A Devgiri spinach COA, line by line

These are the specifications and results printed on a Devgiri COA for dehydrated spinach leaves, as shown on our Certifications page (batch code DFOF/HPD/SPN/26K14, shown in the Devgiri code format).

TestSpecificationResultWhat it tells you
Moisture contentMax 5 %3.5 %How much water is left after drying. The specification sets the maximum, and the result must be at or below it.
Peroxidase testNegativeNegativeChecks that blanching has switched off the enzyme peroxidase. Negative means the enzyme is no longer active.
Foreign matterNilNilAnything that is not the product, such as stones, stalks or other plant parts. Nil means none was found.
Bulk density80 to 120 gm/lit95 gm/litHow many grams of product fill one litre. It tells you how much fits in a pack or a hopper, so it matters for packing and dosing.
Total plate countMax 40,000 cfu/g11,480 cfu/gA count of the bacteria that grow on a lab plate, in colony forming units per gram (cfu/g). The result must be below the maximum.
E. coliAbsent / 25 gAbsentA test for one specific bacterium. "Absent / 25 g" means none was found in a 25 gram sample.
SalmonellaAbsent / 25 gAbsentA test for Salmonella in a 25 gram sample. Absent means none was found.
Listeria monocytogenesAbsent / 25 gAbsentA test for Listeria monocytogenes in a 25 gram sample. Absent means none was found.

The same COA also reports ash: Total ash 5.9 % (max 6 %); acid insoluble ash 1.10% (max 2 %). Total ash is what is left after a sample is burnt, which is mostly minerals. Acid insoluble ash is the part that does not dissolve in acid, mostly sand and soil, so it shows how clean the product is.

A second example: mint

A Devgiri COA for dehydrated mint flakes reads as below. The layout is the same; the specifications are set for mint.

TestResult (specification)
Particle size2 - 5 mm (flakes)
Moisture3.7 % (max 7 %)
Bulk density67 gm/lit (spec 40 to 70 gm/lit)
Total ash / acid insoluble ashTotal ash 5.8 % (max 6 %); acid insoluble ash 0.8% (max 1.5 %)
MicrobiologyTotal plate count 16,260 cfu/g (max 40,000); yeast and mold, coliform, E. coli, Salmonella, Staphylococcus aureus, Listeria monocytogenes: absent
Colour, odour, tasteLight green to dark green; characteristic minty aroma; typical minty taste; dry and crispy

Who signs it

A Devgiri COA is signed by Quality Assurance, the Plant Head and a Director. The batch is sampled, tested in-house (physical, chemical and microbiology), signed off, and the COA ships with the batch.

How to ask for one

Ask for the spec sheet and COA for any product on our contact page. We reply within 24 hours, and samples are dispatched within 7 business days.

Frequently asked questions

Does every Devgiri batch come with a COA?

Yes. A COA ships with every batch.

Who signs a Devgiri COA?

Quality Assurance, the Plant Head and a Director.

Can I see a COA before I order?

Yes. Ask for the spec sheet and COA on our contact page. Samples are dispatched within 7 business days.

Need specific documentation?

Send us your compliance requirements - we'll respond within 24 hours.

Ask for a full COA →