Heaps of dried onion, potato, cabbage and green peas laid out on pale wood

Guide · Updated 17 November 2026

What 60, 80 and 12-16mesh really mean.

A mesh number counts the openings per inch of a sieve, so a higher number means finer particles. A 60 mesh powder passes a sieve with 250 micron openings, an 80 mesh powder passes 180 micron openings, and 12-16 mesh granules pass a 1.70 mm opening but stay on a 1.18 mm one. These openings follow the US standard sieve series (ASTM E11).

Mesh number and opening size

US sieve number (mesh)Opening
121.70 mm
161.18 mm
600.250 mm (250 microns)
800.180 mm (180 microns)

Devgiri products by mesh

ProductMeshDryingTypical uses
Garlic12-16 mesh (granules)Heat pump driedMasala blends and seasoning mixes, snacks and breakfast cereals, and soups and ready meals
Beetroot60 mesh (powder)Heat pump driedMasala blends and seasoning mixes, beverages and smoothie mixes, and nutraceutical and Ayurveda products
Fenugreek60 mesh (powder)Heat pump driedMasala blends and seasoning mixes and nutraceutical and Ayurveda products
Raw banana80 meshHeat pump driedBakery and confectionery and nutraceutical and Ayurveda products

We also make mango, moringa, moringa pod (drumstick) and ginger powders; their mesh is shared in the spec sheet. Custom particle sizes are available on request. See all powders and flakes and granules.

How to state mesh in your enquiry

  • Give the mesh number you need, for example 60 mesh, or a range such as 12-16 mesh.
  • Say whether the powder must pass the sieve fully or within a stated percentage.
  • Ask for the spec sheet and COA so the particle size is written down for every batch. See how to read a COA.

Frequently asked questions

Is 80 mesh finer than 60 mesh?

Yes. A higher mesh number means smaller openings: an 80 mesh sieve has 180 micron openings and a 60 mesh sieve has 250 micron openings, so an 80 mesh powder is finer.

What does 12-16 mesh mean for garlic granules?

The granules pass a 12 mesh sieve (1.70 mm openings) and are held on a 16 mesh sieve (1.18 mm openings), so most pieces are between 1.18 mm and 1.70 mm.

Can Devgiri make a custom particle size?

Yes. Custom particle sizes are available on request. Tell us the mesh you need on the contact page and we will state it in the spec sheet.

Need a specific particle size?

Tell us the product and the mesh you need. We reply within 24 hours.

Get a quote →